FURUNO LIN. ACTUATOR PUMP 9 inch RAM 12V

The Accusteer PUMPLA11-12 Linear Actuator is designed to interface an autopilot system with mechanical steering systems such as wire, cable or chain drives. This linear actuator consists of a hydraulic drive unit, steering cylinder, and interconnecting hoses.This unit is also available as the PUMPLA17-12 using a 1.75" x 9" RAM. 

    Heavy-duty brass cylinder (2" bore x 11" stroke)

    1.5" x 9" RAM

    Stainless steel braid covered hoses

    Compact and rugged drive unit

    Average Motor Current: 3-6 Amps – PUMPLA11-12 (12VDC Motor), 2-4 Amps – PUMPLA11-24 (24VDC Motor)

    Cylinder Design: Balanced

    Max Cylinder Stroke and Swept Volume: 9 in. (23 cm) and 13.1 cubic in. (215 cc)

    Solenoid/Clutch Current Draw: 1.5 Amps (12V)/0.75 Amps (24V)

    Max Cylinder Thrust @ 500 psi: 785 lbs (356 kg)

    Hard Over Time (HOH): About 13 Seconds

    Maximum Rudder Torque (+/-35 deg. @ 8 in. Rudder Shaft to Tiller Bolt Distance): 6280 in. lbs. (710 Nm)

    Raymarine Equivalent Linear Drive: TYPE 1 (Recommended Maximum Boat Displacement = 22,000lbs (10,000kg))

    Simrad Equivalent Linear Drive: HLD350