FURUNO Linear Actuator, 9 inch Ram,12V

The Accusteer PUMPLA17-12 Linear Actuator is designed to interface an autopilot system with mechanical steering systems such as wire, cable or chain drives. This linear actuator consists of a hydraulic drive unit, steering cylinder, and interconnecting hoses.This unit is also available as the PUMPLA11-12 using a 1.5" x 9" RAM. 

    Heavy-duty brass cylinder (2" bore x 11" stroke)

    1.75" x 9" RAM

    Stainless steel braid covered hoses

    Compact and rugged drive unit

    Average Motor Current: 4-8 Amps – PUMPLA17-12 (12VDC Motor), 3-5 Amps – PUMPLA17-24 (24VDC Motor)

    Cylinder Design: Balanced

    Max Cylinder Stroke and Swept Volume: 12 in. (30.5 cm) and 23.5 cubic in. (215 cc)

    Solenoid/Clutch Current Draw: 1.5 Amps (12V)/0.75 Amps (24V)

    Max Cylinder Thrust @ 500 psi: 1045 lbs (474 kg)

    Hard Over Time (HOH): About 14.7 Seconds

    Maximum Rudder Torque (+/-35 deg. @ 10.5 in. Rudder Shaft to Tiller Bolt Distance): 10450 in. lbs. (1181 Nm)

    Raymarine Equivalent Linear Drive: TYPE 2 (Recommended Maximum Boat Displacement = 48,500lbs (22,000kg))

    Simrad Equivalent Linear Drive: HLD2000L